Solve the problem of unable to connect to the network

Solving the problem of unable to connect to the network is one of the things that many people search for because this problem is one of the annoying problems in particular, even if it occurs when you need the Internet.

Most of us suffer from this problem, whether on a mobile phone or a computer, and through our next article, we will identify the procedures to be followed in the event of exposure to this problem.

Solve the problem of unable to connect to the network for computers:

There are many procedures that are followed in the event of exposure to the problem of not connecting the computer to the network, and these procedures are as follows:

Checking the operation of the router If the device is not connected to a Wi-Fi network, here it is necessary to make sure that the router is turned on.

Ensure that power reaches it and this is recognized by the device lights.

In the case if the connection to the Internet is through a dsl line. Here it is necessary to verify that the modem connected to the router is turned on.

Check connection status:

After making sure that the router is turned on, it is necessary to make sure that the router is connected to the Internet.

And that is by looking at the connection status indicator, which is illuminated by lighting another color.

In the case if the connection indicator on the router is not clear in green.

Here it is necessary to disconnect the router from the device, wait for a few minutes, and then turn it on again.

Check service availability:

 The reason behind the inability to connect to the Wi-Fi network can be the lack of internet service from the company.

Here it is necessary to perform the so-called ping on a website, such as Google, and this is done by following the following steps:

Click on the Start button on the computer.

After that, click on the search box that appears on the screen.

Click on the search command, then click on the Enter command.

 After that, type the cmd search command and hit the enter key. It is written as ping Google.com .

After that, they wait until a response from Google arrives in order to make sure that the company's Internet service works without any problems.

Reset the router:

This problem can be solved by resetting the settings of the router. This step is done by clicking on the reset button located on the back of the router.

The pin is relied upon in this step and clicked for up to half a minute, and this step will return the router to its factory settings.

Restart the computer:

The problem of connecting to the Wi-Fi network can only be with the computer without other devices and here the computer restarts.

This step is one of the basic steps that work to solve any problem you may encounter with your computer.

Run the troubleshooter tool:

 It is considered one of the reliable solutions in the event of exposure to the problem of unable to connect to the network because it is possible that the error is in the network settings.

Here are the steps involved in running the Network Troubleshooter on your Windows 10 PC:

The start button is pressed.

 After that, click on the Settings command.

After that, the network and the Internet are selected.

Click on the Status option.

Next, click on the Network Troubleshooter option under the Change network settings section.

All instructions on the troubleshooter screen are followed.

 After that, the problem of connecting the device to the Wi-Fi network will be checked.

 Change the location of the router:

The location of the router could be the reason for the network connection interruption.

In this case, it is preferable to move it to a place that does not contain any barriers. Preferably it should be close to the user's device in order for the network signal to be strong.